How to Prepare for Pipe Bursting: A Homeowner's Checklist

Table of contents
- Before You Book: Know What You Are Getting
- One Week Before: Your Checklist
- The Day Before: Get the Yard Ready
- On Bursting Day: What You Need to Do
- After the Job: What to Check
- If the Home Is a Rental or Has Tenants
- How to Care for Your New HDPE Line
- Common Questions Before Bursting Day
- Will my driveway be damaged?
- Do I need to leave the house?
- What if my line is Orangeburg?
- Ready to Schedule?
Pipe bursting replaces your sewer line through two small pits, so there is far less mess than an open trench. Still, a little planning makes the day smoother for you and the crew. Here is how to prepare for pipe bursting, from the week before to the day after.
Preparation is mostly practical: clear the work area, plan your water use and ask the service provider about the schedule and cleanup.
Before You Book: Know What You Are Getting
Pipe bursting pulls a new HDPE pipe through the path of your old line while a bursting head breaks the old pipe apart. It is a good fit for clay, cast iron and Orangeburg lines that are too damaged to line.
Before you sign, make sure you have seen the camera footage and understand why bursting was chosen over lining or digging. If you are still comparing methods, read our guide on trenchless vs traditional sewer repair.
Ask the service provider for a price that lists the pipe work, both pits, permit, city inspection and restoration.
One Week Before: Your Checklist
- Confirm the permit. Ask who pulls the permit and books the city inspection. In most cases your contractor handles both.
- Find your cleanout. Know where the outdoor cleanout is, and clear plants or decor around it.
- Mark private lines. Note any sprinkler lines, low-voltage lighting or pet fences in the front yard. Public utilities are marked by the locate service before digging.
- Ask where the pits will go. Usually one pit sits near the house and one near the street or property line.
- Tell your neighbors. A short heads-up about equipment and parking keeps everyone happy.
- Plan for pets. Arrange a safe indoor spot or a day away, since gates may be open and pits will be dug.
The Day Before: Get the Yard Ready
A clear work area helps the crew start on time. The night before:
- Move vehicles. Leave the driveway and the curb in front of your home open for the truck and equipment.
- Clear the pit areas. Move pots, furniture and anything stored near the house or front lawn.
- Open access. Unlock side gates and note any gate codes the crew will need.
- Ask about water. Confirm the window when drains will be off so you can plan around it.
On Bursting Day: What You Need to Do
Very little. Most homeowners stay home and go about their day, but there are a few things to keep in mind.
- Limit water use. Do not run showers, laundry or dishes during the connection window. A toilet flush can send water into an open pipe.
- Expect some noise. The pulling machine and small excavator make noise for a few hours, mostly in the yard.
- Stay clear of the pits. Keep children and pets away from open pits and equipment.
- Be reachable. The crew may need you to confirm a pit location or check a fixture inside the house.
The crew finishes with a camera run through the new pipe. Ask to watch it, since it shows the clean, continuous line you are paying for.
After the Job: What to Check
Once the new line is in and connected, run water in every fixture and flush each toilet. Drains should empty quickly and quietly.
- Ask for a copy of the final camera video for your records.
- Confirm when the city inspection is booked, if it has not happened yet.
- Check that the pits are backfilled, level and cleaned up.
- Keep the invoice and permit paperwork with your home records. They help if you sell the house later.
If the Home Is a Rental or Has Tenants
Landlords have a few extra steps. Give tenants written notice of the work date and the water window, and remind them not to run water during the connection.
If several units share one sewer line, every unit is affected at the same time. Ask the crew to schedule the connection during the day, and share the final camera video with your property records so future repairs are easier to plan.
How to Care for Your New HDPE Line
HDPE pipe has heat-fused joints, so roots have a hard time getting in. It is built to last for decades when installed correctly, which is far longer than the clay or cast iron it replaces. See our guide on how long a sewer line lasts for more.
Good habits still matter. Keep grease, wipes and paper towels out of the drains, and call if a drain ever slows down. A quick camera check is easier than waiting for a backup.
Common Questions Before Bursting Day
Will my driveway be damaged?
Usually not. The pits are placed to avoid concrete wherever possible, so the line under the driveway is replaced without breaking it up.
Do I need to leave the house?
No. Most homeowners stay home. Plan to limit water use during the connection window.
What if my line is Orangeburg?
Bursting is often the best fix, since Orangeburg is usually too flattened to line. Learn how to spot Orangeburg pipe.
Ready to Schedule?
When you know how to prepare for pipe bursting, the job is simple: clear the yard, plan your water use and let the crew work. Learn more about the method on our pipe bursting page, or start with a sewer camera inspection.
Call Cerritos Sewer Co. at (562) 603-5090 to ask about an inspection and its cost.
Have a Question About Your Sewer Line?
Call any time to be connected with a local service provider and ask about a camera inspection and its cost. Or send a message and ask about your situation.


